Updates in Stunden statt in einem Tag
Der Nebenslot-Burst schickt die Datenpakete auf einem freien Slot neben dem Mesh-Kanal 869,618 MHz. Ein Slot ist ein Abschnitt von 62,5 kHz, auf dem Mesh-Kanal bleiben nur kurze Ansagen. Ein mittleres Release ist so in Hamburg nach 1,6 bis 2,7 h überall, zum Start im Feld nach 4,9 bis 6,8 h berechnet.
Stand: Der Nebenslot-Burst läuft am Testaufbau mit bis zu 3 Knoten gemessen. Er läuft auch neben älteren FUOTA-Versionen gemessen. Die Alpha-Pakete 1.17.1-b2 und 1.18.0-b3 enthalten ihn mit 2 % Slot-Airtime je Stunde im Code geprüft. Offen sind Messungen im Feld und die Punkte unter Was noch nicht gemessen ist offen.
Updates in hours instead of a day
The side slot burst sends data packets on a free slot beside the mesh channel. A slot is 62.5 kHz wide. The 869.618 MHz mesh channel keeps only short announcements. A medium release then reaches all of Hamburg in 1.6 to 2.7 h. At the field start it takes 4.9 to 6.8 h calculated.
Status: the side slot burst runs on the bench with up to 3 nodes measured. It also runs next to older FUOTA versions measured. The alpha packages 1.17.1-b2 and 1.18.0-b3 contain it with 2 % slot airtime per hour checked in the code. Still open: field measurements and the points under What is not measured yet open.
Der Nebenslot in Kürze
The side slot in brief
Problem
Heute sendet jeder Knoten höchstens 0,3 % Airtime (Sendezeit) auf dem Mesh-Kanal im Code geprüft. Das schont den Kanal. Ein mittleres Release braucht in Hamburg aber 27 h, mit CR 4/5 berechnet. Mehr Airtime auf demselben Kanal geht nicht. Bei 10 % würden Update-Daten im dichtesten Zehntel 60 % des Kanals belegen berechnet.
Prinzip
Der Mesh-Kanal liegt in Band 54 (869,4 bis 869,65 MHz). Die BNetzA führt Band 54 in der Vfg. 91/2025, Tabelle 2, Nr. 54. In ETSI EN 300 220-2 V3.2.1, Anhang B, heißt das Band Teilband P. Das Band hat 4 Slots mit je 62,5 kHz. Der Mesh-Kanal belegt einen davon. Ein Anbieter sagt auf dem Mesh-Kanal einen Burst an: einen Block Datenpakete am Stück. Jeder direkte Nachbar, dem der Block fehlt, wechselt mit auf einen freien Slot. Danach sind alle zurück auf dem Mesh-Kanal.
Schutz
Die Ansage ist mit dem Schlüssel des Anbieters signiert und beantwortet eine Anfrage. Kommt auf dem Slot nichts mehr, kehrt ein Knoten nach 2 fehlenden Datenpaketen zurück. Eine Grenze je Stunde deckelt, wie lange ein Knoten mitwechselt gemessen.
Stand
Der Nebenslot-Burst ist gebaut und läuft am Testaufbau mit bis zu 3 Knoten gemessen. Er läuft auch neben älteren FUOTA-Versionen gemessen. Die Zahlen für Hamburg sind berechnet. Grundlage sind die LoRa-Formel und echte Nachbardaten von Repeatern um Hamburg.
Problem
Today every node sends at most 0.3 % airtime on the mesh channel checked in the code. That spares the channel. But a medium release takes 27 h in Hamburg at CR 4/5 calculated. More airtime on the same channel does not work. At 10 %, updates would fill 60 % of the channel in the densest tenth calculated.
Principle
The mesh channel sits in band 54 (869.4 to 869.65 MHz). BNetzA lists band 54 in Vfg. 91/2025, table 2, no. 54. In ETSI EN 300 220-2 V3.2.1, annex B, the band is called sub-band P. The band has 4 slots of 62.5 kHz each. The mesh channel uses one of them. A provider announces a burst on the mesh channel. A burst is one block of data packets in a row. Every direct neighbour that lacks the block switches to a free slot along with it. Then everyone returns to the mesh channel.
Protection
The announcement is signed with the provider's key and answers a request. If nothing more arrives on the slot, a node returns after 2 missing data packets. A limit per hour caps how long a node follows bursts measured.
Status
The side slot burst is built. It runs on the bench with up to 3 nodes measured. That also holds next to older FUOTA versions measured. The numbers for Hamburg are calculated. They come from the LoRa formula and real neighbour data of repeaters around Hamburg.
So läuft ein Burst
Gemessen am Testaufbau mit SF7, 1 dBm und 2 bis 3 Knoten.
- Anfrage. Dein Repeater fragt wie heute bei einem Anbieter an. Er sagt dabei, dass er
Bursts kann. Das tut er nur, wenn er den Schlüssel des Anbieters seit 6 h
kennt (
src/helpers/fuota/FuotaNRF52.cpp, trusted(),src/helpers/fuota/FuotaNRF52.cpp, canFollow()) im Code geprüft. Nach einem Neustart fragt er zuerst ohne diese Angabe gemessen. - Ansage. Der Anbieter sendet auf dem Mesh-Kanal eine signierte Ansage mit Slot, Block, Startzeit und Dauer. Sie dauert 632 ms berechnet.
- Wechsel. Jeder direkte Nachbar, dem dieser Block fehlt, wechselt sofort auf den Slot. Normale Repeater (ohne FUOTA) wechseln nie. Am Testaufbau war der Mitwechsler 16 bis 19 ms nach dem Ende der Ansage auf dem Slot (20. und 21. Oktober 2026; spätere Läufe lagen roh bei 10,6 bis 12,6 ms, nach Abgleich der Uhrenraten bei 15,7 bis 16,7 ms am 4. November 2026) gemessen. Darin steckt die Prüfung der Signatur. Mit 3 Knoten folgte auch der Nachbar, der nicht selbst gefragt hatte gemessen. Er bekam alle 43 Datenpakete gemessen.
- Burst. Nach 0,5 s Vorlauf hört der Anbieter 0,25 s auf dem Slot
(
src/helpers/fuota/FuotaNRF52.cpp, SLOT_LEAD_MS, SLOT_LISTEN_MS) im Code geprüft. Bei freiem Slot sendet er bis zu 16 Datenpakete, bei SF8 18,3 s Airtime berechnet. Die Datenpakete folgen im Abstand von 20 ms (src/helpers/fuota/FuotaNRF52.cpp, SLOT_GAP_MS) im Code geprüft. Am Testaufbau kamen 41 von 41 Datenpaketen in 4 Bursts an gemessen. Belegter Slot. Sendet ein Nachbar gerade auf dem Mesh-Kanal, misst der Anbieter auch auf Slot 2 einen Pegel. Am Testaufbau waren es −71 bis −75 dBm (20. und 21. Oktober 2026; später −89 dBm am 27. Oktober und −74 und −75 dBm am 3. November 2026) gemessen.
Dann wartet er bis zur Airtime eines Datenpakets und prüft danach noch einmal. Findet er den Slot so 2-mal hintereinander frei, sendet er (
src/helpers/fuota/FuotaNRF52.cpp, slotLoop()) im Code geprüft. Am Testaufbau startete der Burst so nach 251, 613 und 651 ms (21. Oktober 2026; die wiederholten Läufe vom 27. Oktober und 3. November 2026 brauchten 179 und 576 ms sowie 182 und 579 ms, die Prüfgrenze liegt bei 660 ms) gemessen.Der Mitwechsler bekam alle Datenpakete gemessen. Bleibt der Slot belegt, bricht der Anbieter ab gemessen. Er beantwortet die Anfrage auf dem Mesh-Kanal gemessen.
Zurück. Zum angesagten Ende sind alle wieder auf dem Mesh-Kanal. Fehlendes fragen sie wie heute an. Danach wartet jeder noch zufällig bis zu 2 Datenpaket-Zeiten, bevor er wartende Mesh-Pakete sendet (
src/helpers/fuota/FuotaNRF52.cpp, gateHold(),src/helpers/fuota/FuotaNRF52.cpp, burstSendNext()) im Code geprüft.Der Mitwechsler wartet zusätzlich, bis der Anbieter zurück ist. Am Testaufbau stießen ohne diese Wartezeit nach 6 von 6 Bursts zwei Adverts zusammen gemessen. Mit ihr hörten alle 3 Knoten beide Adverts, in 6 von 6 Bursts (21. Oktober 2026; am 27. Oktober 2026 6 von 6 erst im zweiten Lauf, am 3. November 2026 5 von 6, am 4. November 2026 wieder 6 von 6) gemessen. Am Testaufbau hörte der Anbieter danach die nächsten Anfragen wieder auf dem Mesh-Kanal gemessen.
Mesh-Pakete, die während eines Bursts fällig werden, warten und gehen danach auf dem Mesh-Kanal raus. Ein
dritter Knoten lauschte auf dem Slot. Er hörte nur die 41 Datenpakete, kein Advert gemessen. Ein laufender
Burst endet, bevor ein tempradio-Befehl greift gemessen.
How a burst runs
Measured on the bench with SF7, 1 dBm and 2 to 3 nodes.
- Request. Your repeater asks a provider as it does today. It also says that it can take
bursts. It only does so when it has known the provider's key for 6 h
(
src/helpers/fuota/FuotaNRF52.cpp, trusted(),src/helpers/fuota/FuotaNRF52.cpp, canFollow()) checked in the code. After a reboot it first asks without saying so measured. - Announcement. The provider sends a signed announcement on the mesh channel. It carries slot, block, start time and duration. It lasts 632 ms calculated.
- Switch. Every direct neighbour that lacks this block switches to the slot at once. Normal repeaters (without FUOTA) never switch. On the bench the follower was on the slot 16 to 19 ms after the end of the announcement (20 and 21 October 2026; later runs read 10.6 to 12.6 ms raw, and 15.7 to 16.7 ms after correcting for the clock rates on 4 November 2026) measured. That includes checking the signature. With 3 nodes the neighbour that had not asked followed too measured. It got all 43 data packets measured.
- Burst. After a 0.5 s lead the provider listens on the slot for 0.25 s
(
src/helpers/fuota/FuotaNRF52.cpp, SLOT_LEAD_MS, SLOT_LISTEN_MS) checked in the code. If the slot is free, the provider sends up to 16 data packets. That is 18.3 s of airtime at SF8 calculated. The data packets are 20 ms apart (src/helpers/fuota/FuotaNRF52.cpp, SLOT_GAP_MS) checked in the code. On the bench 41 of 41 data packets arrived in 4 bursts measured. Busy slot. While a neighbour sends on the mesh channel, the provider also measures a level on slot 2. On the bench it was −71 to −75 dBm (20 and 21 October 2026). Later runs gave −89 dBm (27 October), −74 and −75 dBm (3 November 2026) measured.
It then waits up to the airtime of one data packet and checks once more. If the slot is free twice in a row, it sends (
src/helpers/fuota/FuotaNRF52.cpp, slotLoop()) checked in the code. On the bench the burst started after 251, 613 and 651 ms (21 October 2026; the repeat runs of 27 October and 3 November 2026 took 179 and 576 ms and 182 and 579 ms, the test limit is 660 ms) measured.The follower got all data packets measured. If the slot stays busy, the provider stops measured. It answers the request on the mesh channel measured.
Back. At the announced end everyone is back on the mesh channel. They request what is missing, as today. Then each node waits a random time of up to 2 data packet times before it sends queued mesh packets (
src/helpers/fuota/FuotaNRF52.cpp, gateHold(),src/helpers/fuota/FuotaNRF52.cpp, burstSendNext()) checked in the code.The follower also waits until the provider is back. Without this wait, two adverts collided after 6 of 6 bursts on the bench measured. With it, all 3 nodes heard both adverts in 6 of 6 bursts (21 October 2026; on 27 October 2026 6 of 6 only in the second run, on 3 November 2026 5 of 6, on 4 November 2026 6 of 6 again) measured. On the bench the provider heard the next requests on the mesh channel again measured.
Mesh packets due during a burst wait. They go out on the mesh channel afterwards. A third node listened on
the slot. It heard only the 41 data packets, no advert measured. A running burst ends before a
tempradio command takes effect measured.
Was es bringt
Die Tabelle vergleicht ein mittleres Release mit 207 Datenpaketen, wenn alle Repeater FUOTA haben. Die Datenpakete tragen Manifest, Prüfwerttabelle und Patch berechnet. Das Manifest ist die signierte Liste der Teile eines Updates. Alle Werte gelten für SF8, 62,5 kHz Bandbreite und CR 4/5 berechnet. Hop 1 ist der Weg vom ersten Knoten zu seinen direkten Nachbarn. Zum Start im Feld beträgt das Airtime-Budget 2 %, höchstens sind 5 % möglich im Code geprüft.
| Mittleres Release | ohne Nebenslot, 0,3 % auf dem Mesh-Kanal | mit Nebenslot, 2 % | mit Nebenslot, 5 % |
|---|---|---|---|
| Hop 1, nur aus Airtime und Airtime-Budget | 21,9 h | 3,3 h | 79 min |
| 152 verbundene Repeater um Hamburg | 26,9 h | 4,9 bis 6,8 h | 1,6 bis 2,7 h |
| Update-Daten auf dem Mesh-Kanal, dichtestes Zehntel | 23,7 min | 49 s Ansagen | 49 s Ansagen |
| Zeit, in der ein Knoten den Mesh-Kanal nicht hört | 0 | 5 bis 7 min | 5 bis 7 min |
Die 26,9 h folgen allein aus Airtime und Airtime-Budget: Hop 1 braucht alle Datenpakete, jeder weitere Hop eine Seite mehr (siehe Last im Mesh), das Beste sind 3 Hops.
Die Spannen mit Nebenslot stammen aus einer Simulation. Sie rechnet mit Anfragen, Wartezeit, Kollisionen und nur Slot 2, auf den Nachbardaten vom 18. Oktober 2026. Eine Spanne reicht vom kleinsten bis zum größten von 12 Läufen. Im Mittel sind es 6,1 h bei 2 %, 2,1 h bei 5 % und 1,5 h bei 9 % berechnet. Allein aus Airtime und Airtime-Budget wären es dort 4,0 h bei 2 % berechnet. Bei 5 % wären es 1,6 h berechnet.
- Auf Last im Mesh rechnen wir ebenfalls mit CR 4/5. Mit CR 4/8 dauern die Datenpakete 1,5-mal so lang, kurze Anfragen 1,22-mal; die Verhältnisse verschieben sich dadurch kaum berechnet.
- Nach jedem Burst pausiert der Anbieter. Die Pause beträgt die Airtime des Bursts geteilt durch
sein Airtime-Budget (
src/helpers/fuota/FuotaNRF52.cpp, burstPause()) im Code geprüft. Nach einem vollen Block mit SF8 sind das 6,3 min bei 5 % berechnet. Bei 2 % sind es 15,8 min berechnet. Am Testaufbau sendete der Anbieter bei 5 % 1.519 ms Airtime gemessen. Danach pausierte er 30.380 ms (21. Oktober 2026; die Wiederholungen vom 27. Oktober und 3. November 2026 maßen 1.601 und 1.622 ms Airtime mit 32.020 und 32.440 ms Pause, immer das 20-Fache) gemessen. - Mehr als 5 % brächte wenig. Bei 9 % wären es 1,4 bis 1,7 h berechnet.
- Am Testaufbau war eine Kampagne mit 41 Datenpaketen nach 49 s vollständig gemessen. Dieser Lauf hatte noch keine Pause nach dem Burst.
What it brings
The table compares a medium release of 207 data packets, with FUOTA on every repeater. The data packets carry the manifest, the check value table and the patch calculated. The manifest is the signed list of an update's parts. All values hold for SF8, 62.5 kHz bandwidth and CR 4/5 calculated. Hop 1 is the way from the first node to its direct neighbours. The airtime budget is 2 % at the field start, 5 % at most checked in the code.
| Medium release | without side slot, 0.3 % on the mesh channel | with side slot, 2 % | with side slot, 5 % |
|---|---|---|---|
| Hop 1, from airtime and airtime budget only | 21.9 h | 3.3 h | 79 min |
| 152 connected repeaters around Hamburg | 26.9 h | 4.9 to 6.8 h | 1.6 to 2.7 h |
| Update data on the mesh channel, densest tenth | 23.7 min | 49 s of announcements | 49 s of announcements |
| Time a node cannot hear the mesh channel | 0 | 5 to 7 min | 5 to 7 min |
The 26.9 h follow from airtime and airtime budget alone. Hop 1 needs all data packets. Each further hop needs one more page (see Load on the mesh). The best case is 3 hops.
The ranges with the side slot come from a simulation. It uses requests, waiting, collisions and slot 2 only. The neighbour data is from 18 October 2026. A range runs from the smallest to the largest of 12 runs. On average it is 6.1 h at 2 %. It is 2.1 h at 5 % and 1.5 h at 9 % calculated. Airtime and airtime budget alone would give 4.0 h there at 2 % calculated. At 5 % it would take 1.6 h calculated.
- On Load on the mesh we calculate with CR 4/5 as well. At CR 4/8 data packets take 1.5 times as long, short requests 1.22 times. So the ratios barely shift calculated.
- After each burst the provider pauses. The pause equals the airtime of the burst divided by its
airtime budget (
src/helpers/fuota/FuotaNRF52.cpp, burstPause()) checked in the code. After a full block at SF8 that is 6.3 min at 5 % calculated. At 2 % it is 15.8 min calculated. On the bench at 5 % the provider sent 1,519 ms of airtime measured. Then it paused for 30,380 ms (21 October 2026; the repeats of 27 October and 3 November 2026 measured 1,601 and 1,622 ms of airtime with pauses of 32,020 and 32,440 ms, always 20 times the airtime) measured. - More than 5 % would bring little. At 9 % it would take 1.4 to 1.7 h calculated.
- On the bench a campaign of 41 data packets was complete after 49 s measured. That run had no pause after the burst yet.
Band 54 und seine Slots
Der Mesh-Kanal in Hamburg liegt bei 869,618 MHz, in Band 54. Dort darf jedes Gerät je Stunde bis zu 10 % der Zeit im Band senden.
Das regelt die BNetzA in der Vfg. 91/2025, Tabelle 2, Nr. 54. Der Mesh-Verkehr zählt mit. FUOTA nutzt darum höchstens 5 %, zusammen mit dem
Mesh höchstens 9 % (src/helpers/fuota/FuotaNRF52.cpp, FUOTA_SLOT_PERMILLE, FUOTA_BAND_PERMILLE, Release-Wächter src/helpers/fuota/FuotaNRF52.cpp, #ifdef FUOTA_RELEASE) im Code geprüft. Zum Start im
Feld sind es 2 % (variants/fuota_common/platformio.ini, FUOTA_SLOT_PERMILLE=20) im Code geprüft. In der ersten Stunde nach einem
Neustart sendet ein Knoten keinen Burst im Code geprüft.
Ein Knoten prüft die 9 % vor jeder FUOTA-Sendung, auch auf dem Mesh-Kanal (src/helpers/fuota/FuotaNRF52.cpp, bandRoom(),
src/helpers/fuota/FuotaNRF52.cpp, radioTx()) im Code geprüft. Für den Test haben wir die Grenze am Testaufbau auf 1 % gesenkt.
Ein Anbieter hielt bei 35,6 s Airtime je Stunde an und sendete später weiter (21. Oktober 2026; später 35,9 s am 27. Oktober und 35,7 s am 3. November 2026, je nachdem, welches Paket als nächstes die Grenze überschritten hätte) gemessen. Dabei ging kein
Datenpaket verloren gemessen.
Die Slots folgen aus dem eingestellten Mesh-Kanal (src/helpers/fuota/FuotaNRF52.cpp, slotMHz()) im Code geprüft:
- Gleiche Bandbreite.
- Je eine Bandbreite Abstand.
- Nur ganz in Band 54.
Für 869,618 MHz sind das:
| Slot | Mitte | Nutzung |
|---|---|---|
| Slot 1 | 869,4305 MHz | nicht genutzt: ragt 0,75 kHz unter die Bandkante |
| Slot 2 | 869,493 MHz | genutzt |
| Slot 3 | 869,5555 MHz | aus: wird auf dem Mesh-Kanal teilweise mitgehört |
| Slot 4 | 869,618 MHz | Mesh-Kanal, bleibt |
Das Band ist geteilt. Meshtastic in der Standard-Einstellung und LoRaWAN-Downlinks (RX2) senden auf 869,525 MHz. Diese Frequenz liegt über Slot 2 und 3. Am Testaufbau lauschte ein Knoten auf dem Mesh-Kanal (erster Lauf, 20. bis 21. Oktober 2026):
- Von Slot 3 dekodierte er 5 von 48 Datenpaketen (21. Oktober 2026; am 27. Oktober und am 3. November 2026 keines von 48) gemessen.
- In einem zweiten Lauf auf Slot 3 kamen 24 von 48 Datenpaketen fehlerhaft an (21. Oktober 2026; der Fehlerzähler stieg am 27. Oktober 2026 nur um 8, am 3. November 2026 um 13) gemessen.
- Von Slot 2 dekodierte er keines gemessen.
- Mesh-Pakete gingen bei Slot 2 nicht verloren: Während ein zweiter Knoten dort sendete, kamen 40 von 40 Proben auf dem Mesh-Kanal an gemessen. Bei Slot 3 war das nur im ersten Lauf so (39 bis 40 von 40). Am 27. Oktober 2026 kamen mit einem Sender auf Slot 3 nur 5 von 40 Proben an gemessen.
Am Ort des Testaufbaus war Slot 2 bei 8 bis 31 von 2.000 Prüfungen belegt (21. Oktober 2026; am 3. November 2026 waren es auf A, B und C je Runde 2 bis 99 von 1.500, in 6 von 9 Runden höchstens 13)gemessen. Die Belegung an anderen Orten in Hamburg ist offen offen.
Band 54 and its slots
The mesh channel in Hamburg sits at 869.618 MHz, in band 54. There every device may send up to 10 % of the
time per hour. That holds for the whole band. The BNetzA sets this in Vfg. 91/2025, table 2, no. 54. Mesh traffic counts too. So FUOTA uses 5 % at most, 9 % at most together with the mesh
(src/helpers/fuota/FuotaNRF52.cpp, FUOTA_SLOT_PERMILLE, FUOTA_BAND_PERMILLE, release guards src/helpers/fuota/FuotaNRF52.cpp, #ifdef FUOTA_RELEASE) checked in the code. The field start uses 2 %
(variants/fuota_common/platformio.ini, FUOTA_SLOT_PERMILLE=20) checked in the code. In the first hour after a reboot a node sends no
burst checked in the code.
A node checks the 9 % before every FUOTA transmission, on the mesh channel too (src/helpers/fuota/FuotaNRF52.cpp, bandRoom(),
src/helpers/fuota/FuotaNRF52.cpp, radioTx()) checked in the code. For the bench test we lowered the limit to 1 %. A provider stopped at
35.6 s of airtime per hour and sent on later (21 October 2026; later 35.9 s on 27 October and 35.7 s on 3 November 2026, depending on which packet would have crossed the limit next) measured. No data packet was lost measured.
The slots follow from the configured mesh channel (src/helpers/fuota/FuotaNRF52.cpp, slotMHz()) checked in the code:
- Same bandwidth.
- One bandwidth apart.
- Only fully inside band 54.
For 869.618 MHz they are:
| Slot | Centre | Use |
|---|---|---|
| slot 1 | 869.4305 MHz | not used: reaches 0.75 kHz below the band edge |
| slot 2 | 869.493 MHz | used |
| slot 3 | 869.5555 MHz | off: partly heard on the mesh channel |
| slot 4 | 869.618 MHz | mesh channel, stays |
The band is shared. Meshtastic in its default setting and LoRaWAN downlinks (RX2) transmit on 869.525 MHz. That frequency lies across slots 2 and 3. On the bench a node listened on the mesh channel (first run, 20 to 21 October 2026):
- From slot 3 it decoded 5 of 48 data packets (21 October 2026). It decoded none of 48 on 27 October and on 3 November 2026 measured.
- In a second run on slot 3, 24 of 48 data packets arrived faulty (21 October 2026; the error counter rose by only 8 on 27 October 2026 and by 13 on 3 November 2026) measured.
- From slot 2 it decoded none measured.
- Mesh packets were not lost on slot 2. While a second node sent there, 40 of 40 probes arrived on the mesh channel measured. On slot 3 that held only in the first run (39 to 40 of 40). On 27 October 2026, with a sender on slot 3, only 5 of 40 probes arrived measured.
At the bench site slot 2 was busy in 8 to 31 of 2,000 checks (21 October 2026; on 3 November 2026 it was 2 to 99 of 1,500 per round on A, B and C, at most 13 in 6 of 9 rounds) measured. How busy it is elsewhere in Hamburg is open open.
Was das Mesh davon merkt
Während eines Bursts hört ein Knoten den Mesh-Kanal nicht. Das betrifft nur Repeater mit FUOTA, die gerade mitwechseln. Normale Repeater und Companions merken es nur, wenn ihr Weg gerade über so einen Knoten führt. Companions sind die Funkgeräte zu den Apps.
- Je mittlerem Release hört ein Knoten 5 bis 7 min nichts berechnet. Nach jedem Burst pausiert der Anbieter. Ein Nachbar ist darum je Anbieter höchstens 21 s am Stück taub berechnet. Sind mehrere Anbieter in Reichweite, greift die Grenze je Stunde. Sie deckelt die Zeit auf dem Slot insgesamt im Code geprüft.
- Fluten finden fast immer einen anderen Weg. Bei 5 % bleiben 97,5 % der Knotenpaare verbunden, die gerade hören berechnet.
- Eine Direktnachricht über 2 Repeater kommt ohne Wiederholung in 90,0 % der Fälle durch berechnet. Ohne Nebenslot stören Update-Daten auf dem Mesh-Kanal etwa genauso oft. Ein anderes grobes Modell ergibt 87,1 % berechnet.
- Der Unterschied: Ohne Nebenslot verteilt sich die Störung über einen Tag. Mit Nebenslot liegt sie in der viel kürzeren Zeit des Updates.
What the mesh notices
During a burst a node cannot hear the mesh channel. That only affects repeaters with FUOTA that follow the burst. Normal repeaters and companions notice only when their path runs through such a node then. Companions are the radios behind the apps.
- Per medium release a node hears nothing for 5 to 7 min calculated. After each burst the provider pauses. So a neighbour is deaf for at most 21 s per provider at a time calculated. With several providers in range the limit per hour applies. It caps the total time on the slot checked in the code.
- Floods almost always find another way. At 5 %, 97.5 % of the pairs of listening nodes stay connected calculated.
- A direct message over 2 repeaters gets through without a retry in 90.0 % of cases calculated. Without the side slot, update data on the mesh channel disturbs about as often. A different rough model gives 87.1 % calculated.
- The difference: without the side slot the disturbance spreads over a day. With it, it falls into the much shorter time of the update.
Wo der Nebenslot hilft
- Er hilft nur zwischen 2 Repeatern mit FUOTA, die sich direkt hören. Über normale Repeater läuft es wie heute, mit 0,3 % auf dem Mesh-Kanal.
- Nimm an, nur 10 bis 50 % der Repeater haben FUOTA, zufällig verteilt. Dann bremsen die Wege über normale Repeater. Ein mittleres Release braucht mit Nebenslot 2,1 bis 2,5 Tage berechnet. Ohne Nebenslot sind es 2,5 bis 2,7 Tage berechnet.
- Fangen die bestverbundenen Repeater an, reicht schon ein Zehntel. Dann sind es 1,4 h mit 5 % und 3,4 h mit 2 % berechnet. Ohne Nebenslot sind es 22 h berechnet.
- Ein fester eigener Slot je Anbieter bräuchte in Hamburg 7 Slots berechnet. Für 869,618 MHz gibt es 2 Slots neben dem Mesh-Kanal. Der Burst nutzt nur Slot 2. Darum prüft jeder Anbieter vor jedem Burst, ob der Slot frei ist.
- Später könnte ein Anbieter für nahe Nachbarn ein kleineres SF nehmen. Mit SF5 wäre ein Burst 5,3-mal so schnell wie mit SF8 berechnet offen.
Where the side slot helps
- It only helps between 2 repeaters with FUOTA that hear each other directly. Across normal repeaters it runs as today, at 0.3 % on the mesh channel.
- Say only 10 to 50 % of the repeaters have FUOTA, spread at random. Then the paths across normal repeaters hold it back. A medium release takes 2.1 to 2.5 days with the side slot calculated. Without the side slot it takes 2.5 to 2.7 days calculated.
- If the best connected repeaters start, a tenth is enough. Then it takes 1.4 h at 5 % and 3.4 h at 2 % calculated. Without the side slot it takes 22 h calculated.
- A fixed slot for each provider would need 7 slots in Hamburg calculated. For 869.618 MHz there are 2 slots beside the mesh channel. Bursts use only slot 2. So each provider checks before every burst that the slot is free.
- Later a provider could use a lower SF for close neighbours. At SF5 a burst would be 5.3 times as fast as at SF8 calculated open.
Angriffe
Ohne Schutz könnte ein einziges gefälschtes Paket alle holenden Nachbarn vom Mesh-Kanal holen. Sie wären dann rund 20 s weg berechnet. Darum gilt für jeden Wechsel, am Testaufbau mit einem dritten Knoten als Angreifer geprüft:
- Die Ansage ist mit dem Schlüssel des Anbieters signiert. Den Schlüssel kennt der Knoten aus dessen Advert (Selbstmeldung), sonst wechselt er nicht. Eine Ansage im Namen eines anderen verwarf er gemessen.
- Die Ansage beantwortet eine offene Anfrage. Eine Ansage ohne passende Anfrage und eine wiederholte alte Ansage verwarf er gemessen.
- Kommt 2 Datenpakete lang nichts, kehrt der Knoten zurück. Am Testaufbau tat er das 1.524 ms nach dem letzten Datenpaket gemessen. Die Grenze lag bei 1.526 ms gemessen. Bei einem einzelnen verlorenen Datenpaket blieb er gemessen.
- Ein Knoten wechselt je Stunde höchstens 3-mal so lange mit, wie sein Budget erlaubt
(
src/helpers/fuota/FuotaNRF52.cpp, followRoom()) im Code geprüft. Ist die Grenze erreicht, holt er auf dem Mesh-Kanal gemessen. Mit 5 % sind das 9 min je Stunde berechnet. Zum Start mit 2 % sind es 3,6 min berechnet. - Eine Anfrage an „wer es hat" löst keinen Burst aus gemessen.
- Ein Knoten wechselt nur bei Anbietern mit, deren Schlüssel er seit 6 h kennt im Code geprüft. Dafür
merkt er sich bis zu 32 Anbieter in einer Vertrauensliste. Höchstens 8 davon kennt er kürzer als 6 h
(
src/helpers/fuota/FuotaNRF52.cpp, FUOTA_TRUST_N,src/helpers/fuota/FuotaNRF52.cpp, trustSeen()) im Code geprüft. Am Testaufbau galten 10 min statt 6 h. Bei einem neuen Anbieter wechselte der Knoten dort nicht mit gemessen. - Ein Burst zählt nur als nützlich, wenn er Datenpakete brachte, die dem Knoten fehlten im Code geprüft.
Nach 2 nutzlosen Bursts in Folge beginnen die 6 h des Anbieters neu (
src/helpers/fuota/FuotaNRF52.cpp, backOff()) im Code geprüft. Am Testaufbau galten 60 s statt 6 h. Der Knoten wechselte danach erst nach 60 s wieder mit gemessen. - In Format 4 hat jedes Datenpaket einen Prüfwert, abgesichert durch das signierte Manifest. Der Knoten prüft
jedes beim Empfang (
src/helpers/fuota/FuotaNRF52.cpp, fragOk(),src/helpers/fuota/FuotaNRF52.cpp, onData()) im Code geprüft. Passt ein Datenpaket im Burst nicht dazu, kehrt der Knoten sofort zurück gemessen. Auf dem Mesh-Kanal verwirft er ein solches Datenpaket gemessen. - Passt ein Datenpaket nicht zu seinem Prüfwert, meidet ein Knoten dessen Anbieter 10 min im Code geprüft.
Falsche Datenpakete in dieser Zeit verlängern das nicht gemessen. Kommt nach Ablauf der Zeit wieder ein
falsches Datenpaket, verdoppelt sich die Zeit, höchstens auf 24 h im Code geprüft. Ein Datenpaket mit passendem
Prüfwert vom selben Anbieter setzt sie zurück (
src/helpers/fuota/FuotaNRF52.cpp, avoided(), avoidBad(), avoidGood(),src/helpers/fuota/FuotaNRF52.cpp, onData()) im Code geprüft. Am Testaufbau fragte der Knoten dann den anderen Anbieter gemessen. Die Kennung des Anbieters im Datenpaket ist nicht signiert im Code geprüft. Ein Angreifer kann so einen ehrlichen Anbieter meiden lassen. Waren am Testaufbau beide gemieden, holte der Knoten über „wer es hat" weiter gemessen.
Was bleibt: Ein Angreifer kann Nachbarn zeitweise vom Mesh-Kanal fernhalten. Mit vielen Schlüsseln, aber ohne echte Daten, sind es 0,38 bis 0,61 % je Stunde berechnet. Sendet er echte Datenpakete einzeln, sind es bei 2 % Budget bis zu 6 % berechnet. Das geht nur, solange dem Nachbarn Datenpakete fehlen, und endet mit dem Update. Wechselt ein Knoten beim Burst eines Angreifers mit, ist er nach 2,3 s zurück gemessen. Danach meidet er ihn 10 min gemessen. Ein Angreifer kann auch einen ehrlichen Anbieter meiden lassen und so das Holen bremsen im Code geprüft.
Attacks
Without protection a single forged packet could take all pulling neighbours off the mesh channel. They would be gone for about 20 s calculated. So every switch follows these rules. We tested them on the bench with a third node as the attacker:
- The announcement is signed with the provider's key. The node knows that key from the provider's advert (self-announcement), otherwise it does not switch. It rejected an announcement in another node's name measured.
- The announcement answers an open request. It rejected an announcement without a matching request and a replayed old one measured.
- If nothing arrives for 2 data packets, the node returns. On the bench it did so 1,524 ms after the last data packet measured. The limit was 1,526 ms measured. With a single lost data packet it stayed measured.
- Per hour a node follows bursts for at most 3 times what its budget allows (
src/helpers/fuota/FuotaNRF52.cpp, followRoom()) checked in the code. Once the limit is reached, it pulls on the mesh channel measured. At 5 % that is 9 min per hour calculated. At the 2 % field start it is 3.6 min calculated. - A request to "whoever has it" starts no burst measured.
- A node follows only providers whose key it has known for 6 h checked in the code. For this it
keeps up to 32 providers in a trust list. It has known at most 8 of them for less than 6 h
(
src/helpers/fuota/FuotaNRF52.cpp, FUOTA_TRUST_N,src/helpers/fuota/FuotaNRF52.cpp, trustSeen()) checked in the code. On the bench we used 10 min instead of 6 h. The node did not follow a new provider there measured. - A burst only counts as useful if it brought data packets the node lacked checked in the code. After 2
useless bursts in a row, that provider's 6 h restart (
src/helpers/fuota/FuotaNRF52.cpp, backOff()) checked in the code. On the bench we used 60 s instead of 6 h. The node then followed again only after 60 s measured. - In format 4 every data packet has a check value, secured by the signed manifest. The node checks
each one on arrival (
src/helpers/fuota/FuotaNRF52.cpp, fragOk(),src/helpers/fuota/FuotaNRF52.cpp, onData()) checked in the code. If a burst data packet does not match it, the node returns at once measured. On the mesh channel it drops such a data packet measured. - If a data packet fails its check value, a node avoids its provider for 10 min checked in the code.
Wrong data packets meanwhile do not extend it measured. A wrong data packet after the time ends
doubles it, up to 24 h checked in the code. A matching data packet from the same provider resets it
(
src/helpers/fuota/FuotaNRF52.cpp, avoided(), avoidBad(), avoidGood(),src/helpers/fuota/FuotaNRF52.cpp, onData()) checked in the code. On the bench the node then asked the other provider measured. The provider identifier in data packets is not signed checked in the code. So an attacker can make nodes avoid an honest provider. With both avoided on the bench, the node pulled from "whoever has it" measured.
What remains: an attacker can keep neighbours off the mesh channel for a while. Many keys without real data cost neighbours 0.38 to 0.61 % per hour calculated. Real data packets sent one at a time raise it to 6 % at a 2 % budget calculated. That only works while the neighbour lacks data, and ends with the update. If a node follows an attacker's burst, it is back after 2.3 s measured. It then avoids that provider for 10 min measured. An attacker can also make nodes avoid an honest provider, which slows the pull checked in the code.
Was schon gemessen ist
Testaufbau: SF7, 1 dBm, rund 50 cm Abstand. Mesh-Kanal 869,618 MHz, Slot 2 auf 869,493 MHz.
- Der Funkchip SX1262 empfängt nach dem Umschalten sofort auf dem Slot gemessen. Das klappte in 12 von 12 Läufen (20. und 27. Oktober 2026; am 4. November 2026 in zwei Läufen nur 11 von 12, einmal kam der Auslöser nicht an, einmal fehlte eine Probe; am 6. November 2026 in drei Läufen 12 von 12, zweimal erst nach der Wiederholung eines lückenhaften Laufs) gemessen.
- Das Umschalten mit kurzem Standby und Neustart des Empfangs dauert 6,8 ms
gemessen. Der Knoten geht dafür so vor
(
examples/simple_repeater/MyMesh.cpp, MyMesh::slotTune(),src/helpers/radiolib/RadioLibWrappers.h, receivingNow()) im Code geprüft:- Er setzt Standby.
- Er setzt die neuen Werte.
- Er startet den Empfang neu.
- Mit eingestellten 0, 20 und 50 ms Abstand ging kein Datenpaket verloren, 0 von 300 gemessen. Tatsächlich lagen die Abstände bei 10 bis 61 ms gemessen.
- Ein Schreibzugriff auf das Dateisystem hält einen Knoten bis 0,8 s auf gemessen. Die angesagte Dauer
enthält dafür 1 s Reserve (
src/helpers/fuota/FuotaNRF52.cpp, SLOT_RESERVE_MS) im Code geprüft. - Auf leerem Slot meldete die Kanalprüfung (CAD) fälschlich belegt gemessen. Das geschah in 2 bis 4 von 1.000 Fällen gemessen. Darum gilt ein Slot erst nach 2 Treffern hintereinander als belegt.
- Der Nebenslot braucht 8.912 B Flash und 2.880 B RAM. Das schließt Vertrauensliste und Format 4 ein. Gemessen ist ein
Image ohne Testbefehle:
- vor dem Nebenslot (Stand 20. Oktober 2026): 270.192 B gemessen
- mit Vertrauensliste und Format 4 (Stand 22. Oktober 2026): 279.104 B, das sind 69 von höchstens 96 Seiten gemessen
- Danach kamen das Meiden von Anbietern und Korrekturen dazu. Das Release-Image wuchs dadurch von 279.008 B (22. Oktober 2026) auf 279.488 B (26. Oktober 2026) gemessen. Das waren weiter 69 von höchstens 96 Seiten berechnet. Das Release-Image vom 8. November 2026 ist größer: 299.284 B und 74 Seiten. Das Alpha-Image 1.18.0-b3 hat 306.104 B und 75 Seiten (Flash und RAM).
- In 1 Stunde Dauerbetrieb sendete der Anbieter 308 s, das sind 8,6 % (22. Oktober 2026; 303 s oder 8,4 % am 27. Oktober und 319 s oder 8,9 % am 3. November 2026, alle unter der Grenze von 324 s) gemessen. Er zählte dabei 0,5 % weniger Airtime als der Funkchip (22. Oktober 2026; 0,27 % am 27. Oktober und 0,62 % am 3. November 2026) gemessen.
- Eine frühere Firmware prüfte die 9 % nur beim Burst, nicht auf dem Mesh-Kanal. Die jetzige prüft sie vor jeder FUOTA-Sendung gemessen.
- Ältere FUOTA-Versionen: Ein Knoten ohne Nebenslot beantwortete Anfragen von Knoten mit Nebenslot, auch ihre längeren. Er holte selbst ein Update von einem Anbieter mit Nebenslot, auf dem Mesh-Kanal gemessen.
- Mit Pause und 9-%-Grenze liefen alle Tests noch einmal, außer Umschalten und Nachbarkanal gemessen.
Dazu gehören:
- ein Burst für mehrere Nachbarn
- kein Mesh-Paket auf dem Slot
- verlorene Datenpakete
- ein Neustart
tempradio- Angriffe
- Neu dazu kamen:
- eine Kette über 3 Knoten gemessen
- 2 Anbieter gemessen
- ein Weg über ein Relais gemessen
- Der Rückfall auf die alte Firmware klappte gemessen.
- Mit der Wartezeit nach der Rückkehr liefen danach alle Tests erneut, die durch die Rückkehr gehen gemessen.
- Fremde Funkarten: Sendungen mit SF12 und SF11 bei 125 kHz meldet die Slot-Prüfung als belegt gemessen. Sie erkennt sie über den Pegel, kaum über CAD gemessen.
- Im Stromsparbetrieb lief der Burst wie ohne gemessen. Der Mitwechsler war 16 und 17 ms nach der Ansage auf dem Slot (21. Oktober 2026; später roh 9,6 bis 11,6 ms am 3. und 4. November 2026, nach Abgleich der Uhrenraten 14,7 ms am 4. November 2026) gemessen.
- Die Testgeräte liegen in der Frequenz höchstens rund 0,5 kHz auseinander gemessen. Empfangen wird bis rund 15 kHz Abweichung gemessen.
- Ein Knoten auf Slot 2 dekodierte bei 50 cm auch 1 von 23 Paketen vom Mesh-Kanal gemessen. Für einen Mitwechsler ist das harmlos, er nimmt nur angesagte Datenpakete.
- Mit Format 4 holten Knoten am Testaufbau Updates, auch über einen weiterleitenden Repeater gemessen. Ein neueres Angebot ersetzte eine gehaltene Kampagne erst nach geprüftem Manifest gemessen. Ein Retract (signierter Rückruf) stoppte die Kampagne gemessen. Ein per USB installiertes Release-Paket gab sein Update an Nachbarn weiter gemessen. Das überlappende Anwenden klappte auf FakeTec und SenseCAP P1 gemessen.
- Ein Knoten prüft ein Datenpaket in 292 µs gemessen. Ein Knoten mit Format 3 verwirft ein Angebot in Format 4 gemessen. Er hört Anfragen und Ansagen mit, sendet aber nichts gemessen.
Was noch nicht gemessen ist
- Sendungen mit 250 kHz Bandbreite, etwa Meshtastic auf 869,525 MHz. Am Testaufbau senden wir sie nicht, weil sie den Mesh-Kanal überdecken offen.
- Die Frequenzabweichung fremder Geräte und die absolute Frequenz offen.
- Die Belegung der Slots an anderen Orten in Hamburg, gemessen nur durch Zuhören offen.
Die Rechnungen machen fuota/tools/nebenslot_airtime.py, nebenslot_rollout.py,
nebenslot_reuse.py und nebenslot_adoption.py. Einwände gehören zu den
Fragen.
What is measured already
Bench: SF7, 1 dBm, about 50 cm apart. Mesh channel 869.618 MHz, slot 2 at 869.493 MHz.
- The SX1262 radio receives on the slot right after the switch measured. That worked in 12 of 12 runs (20 and 27 October 2026; on 4 November 2026 only 11 of 12 in two runs, once the trigger did not arrive and once a probe was missing; on 6 November 2026 12 of 12 in three runs, twice only after repeating a run with a gap) measured.
- Switching with a short standby and a restart of the receiver takes 6.8 ms
measured. The node does this
(
examples/simple_repeater/MyMesh.cpp, MyMesh::slotTune(),src/helpers/radiolib/RadioLibWrappers.h, receivingNow()) checked in the code:- It sets standby.
- It sets the new values.
- It restarts the receiver.
- With spacings set to 0, 20 and 50 ms, no data packet was lost, 0 of 300 measured. The real spacings were 10 to 61 ms measured.
- A file system write holds a node up for up to 0.8 s measured. The announced duration includes 1 s of
reserve for that (
src/helpers/fuota/FuotaNRF52.cpp, SLOT_RESERVE_MS) checked in the code. - On an empty slot the channel check (CAD) falsely reported busy measured. That happened in 2 to 4 of 1,000 cases measured. So a slot only counts as busy after 2 hits in a row.
- The side slot needs 8,912 B of flash and 2,880 B of RAM. That includes the trust list and format 4. We
measured an image without test commands:
- before the side slot (as of 20 October 2026): 270,192 B measured
- with trust list and format 4 (as of 22 October 2026): 279,104 B, so 69 of at most 96 pages measured
- Avoiding providers and fixes came after that. They grew the release image from 279,008 B (22 October 2026) to 279,488 B (26 October 2026) measured. That was still 69 of at most 96 pages calculated. The release image of 8 November 2026 is larger. It has 299,284 B and 74 pages. The alpha image 1.18.0-b3 has 306,104 B and 75 pages (Flash and RAM).
- In 1 hour of continuous operation the provider sent 308 s, that is 8.6 % (22 October 2026; 303 s or 8.4 % on 27 October and 319 s or 8.9 % on 3 November 2026, all below the limit of 324 s) measured. Its own count was 0.5 % below the radio's (22 October 2026). It was 0.27 % below on 27 October, 0.62 % on 3 November 2026 measured.
- Earlier firmware checked the 9 % only for the burst, not on the mesh channel. The current one checks it before every FUOTA transmission measured.
- Older FUOTA versions: a node without the side slot answered requests from nodes with it. It answered their longer ones too. It pulled an update itself from a provider with the side slot, on the mesh channel measured.
- With pause and 9 % limit, all tests but switching and adjacent channel ran again measured. They
include:
- a burst for several neighbours
- no mesh packet on the slot
- lost data packets
- a reboot
tempradio- attacks
- New were:
- a chain of 3 nodes measured
- 2 providers measured
- a path through a relay measured
- The revert to the old firmware worked measured.
- With the wait after the return, all tests passing through the return ran again measured.
- Other radio kinds: the slot check reports SF12 and SF11 at 125 kHz busy measured. It sees them by their level, hardly by CAD measured.
- In power saving the burst ran as without it measured. The follower was on the slot 16 and 17 ms after the announcement (21 October 2026; later 9.6 to 11.6 ms raw on 3 and 4 November 2026, and 14.7 ms after correcting for the clock rates on 4 November 2026) measured.
- The test devices are at most about 0.5 kHz apart in frequency measured. Reception works up to about 15 kHz offset measured.
- At 50 cm a node on slot 2 decoded 1 of 23 mesh packets measured. That does no harm to a follower, which only takes announced data packets.
- With format 4, nodes on the bench pulled updates, also through a forwarding repeater measured. A newer offer replaced a held campaign only after its manifest checked out measured. A retract (signed recall) stopped the campaign measured. A release package installed by USB passed its update on to neighbours measured. Overlapping apply worked on FakeTec and SenseCAP P1 measured.
- A node checks one data packet in 292 µs measured. A node with format 3 drops an offer in format 4 measured. It hears requests and announcements but sends nothing measured.
What is not measured yet
- Transmissions with 250 kHz bandwidth, such as Meshtastic on 869.525 MHz. We do not send them on the bench, because they cover the mesh channel open.
- The frequency offset of other devices and the absolute frequency open.
- How busy the slots are elsewhere in Hamburg, measured by listening only open.
The calculations come from fuota/tools/nebenslot_airtime.py, nebenslot_rollout.py,
nebenslot_reuse.py and nebenslot_adoption.py. Objections belong under
Questions.